Description
Binks MACH 1A Automatic HVLP Air Spray Gun Pressure Feed
Contact Us for different Nozzle Sizes.
Incorporating some of the best features of our award winning Binks MACH 1 HVLP spray gun, the MACH 1A Automatic offers total control of atomizing air pressure, side port air, fluid flow, and spray patterns in production settings which require automatic equipment. These features give it an exceptionally high degree of atomizing capability with a wide range of coatings. This spray gun provides transfer efficiency in compliance with all regulations for air quality as an HVLP air spray gun and meets SCAQMD Rules for HVLP.
Constructed of a lightweight drop forged aluminum body and stainless steel fluid passages, the spray gun is designed to stand up under hard, continuous use. Ranges from 6 to 22 SCFM depending on operating pressure. A 1.5 to 5 horsepower air compressor is normally sufficient to supply atomizing air.
The MACH 1A also features independent control of atomizing and side port air, giving it an exceptionally high degree of atomizing capability with a wide range of coatings.
Body: Drop-forged aluminum
Weight: 20.5 Oz.
Cylinder Air Inlet: 1/4″ NPS (M)
Cylinder Air Pressure: 40 PSI Min / 100 PSI Max
Atomization Air: 1/4″ NPS (M)
Fluid Inlet: 3/8″ NPS (M)
Fluid Passages: Stainless Steel
Fluid Pressure: 100 PSI Max
Mounting Hole: 1/2″ Dia.
Part Sheet: 77-2467
Gun Repair Kit: 54-3980
Packing Kit (Minus Needle): 54-4261
6203-1104-4 – MACH 1A 91-94P (1.0mm) 13 CFM-Thin
6203-1203-4 – MACH 1A 94-93P (1.4mm) 10 CFM-Thin/Medium
6203-1204-4 – MACH 1A 94-94P (1.4mm) 13 CFM-Thin/Medium
6203-1604-4 – MACH 1A 92-94P (1.2mm) 13 CFM-Thin
