Select Page

SEARCH:

51-201C - Resin (Mold) Casting 2.5 Gallon Pressure Pot

51-201C – Resin (Mold) Casting 2.5 Gallon Pressure Pot

$379.95

SKU: CA51-201C Categories: ,

Description

51-201C – Resin (Mold) Casting 2.5 Gallon Pressure Pot

51-201C Resin (Mold) Casting 2.5 Gallon Pressure Pot. C.A. Technologies 51-201C Resin (Mold) Casting Chamber 2.5 gallon Non-ASME pressure pot (Tank) from C.A.T. is constructed of heavy gauge steel. Used for resin casting, mold casting, and pressure leak testing. Unlike paint pots these pots do not have a pick up tube. This non-agitated pot is teflon coated inside and out. An aluminum removable inner liner is available. The pot has wheels for maneuverability or optional stationary feet.

  • Caster Wheels Included for easy maneuverability
  • Teflon Coated inside and out
  • Pot Liners available for less mess
  • Replacement Pot Gasket CA51-220
  • Additional Pot Liners (12 Pk) CA-51-261-12, (60 Pk) CA51-261-60
  • Inlet: 1/4 in. MNPS
  • This model does not includes a ball valve between the air regulator and pressure pot. Order 52-150 ball valve separately if needed.

CA51-201C

Reviews

There are no reviews yet.

Be the first to review “51-201C – Resin (Mold) Casting 2.5 Gallon Pressure Pot”

Your email address will not be published. Required fields are marked *

18 − 18 =

Customer Questions & Answers

  1. Q Can vacuum be applied to this pot to degas materials as well?
    Asked by Erik on March 24, 2021 9:48 am
    There are no answers for this question yet. Answer now
  2. Q I understand one is used for Resin (Mold) Casting but what are the main specification differences... answer now
    Asked by Ken Ma on June 10, 2020 2:18 pm
    Answered by the admin

    The 51-201C is designed for long-term holding pressure as Casting can take several hours at a time. On top of that the 51-201C lacks the fluid pick-up tube which would be required to spray paint.
  3. Q what is the shipping weight of this item answer now
    Asked by jim on February 3, 2020 3:29 pm
    Answered by the admin 32 lbs
  4. Q What is the dimension of inside chamber? How you can pressurize the chamber? Do you have a manual? answer now
    Asked by Gaurang Dave on October 7, 2019 10:48 am
    Answered by the admin

    Dimension of inside chamber: approximately  8 1/2 inches Deep, 10 1/2 inch Diameter.

    How to pressurize the chamber: an air compressor

    Find the manual here: http://spraycat.com/51-[201-202-202SS-207].pdf

    Is it possible to maintain pressure inside the chamber (30 psi) for 4 hours? Yes

     
  5. Q What is the maximum working pressure of this pot? answer now
    Asked by Maynard Ramsey on August 1, 2019 11:51 am
    Answered by the admin

    80 psi is the maximum pressure this pressure pot will accept before the safety relief valve pops off.

Send me a notification for each new answer.

Prop 65 Warning!

This product can expose you to chemicals which are known to the State of California to cause cancer.

Customers who buy this item also bought:

 

{"cart_token":"","hash":"","cart_data":""}