Select Page
17A341 - Graco Thermolazer 200TC Thermoplastic Line Striper System 3-3-3 in. FlexDie
ThermoLazer-Logo_OP

17A341 – Graco Thermolazer 200TC Thermoplastic Line Striper System 3-3-3 in. FlexDie

$5,889.00

Commercial or Residential Shipping *

Product Description

17A341 – Graco Thermolazer 200TC Thermoplastic Line Striper System 3-3-3 in. FlexDie

17A341 Graco Thermolazer 200TC Thermoplastic Line Striper System 3-3-3 in. FlexDie. A portable thermoplastic handliner ideal for striping contractors who already have premelt kettle systems. Graco changed the world of thermoplastic striping with the ThermoLazer Striping System, and we’ve done it again with the new ThermoLazer 200TC. The premiere solution for smaller thermoplastic striping jobs. Applications: Intersections/Roadways, Parking Lots/Stencels, Bike/Walking Paths, Parking Garages, Highway Striping.

Features:

  • FlexDie – Delivers excellent line quality with exclusive deep-die, all steel construction and a no-tools change out design
  • 200 lb/90 kg Material Kettle – Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colors fast
  • 40 lb/18 kg Bead Hopper – Perfectly matched to the material kettle with a superior flow design
  • Direct Heat System – Direct flames and an on-board hand torch deliver maximum heat, resulting in maximum material flow
  • Tri-Wheel System – Dual solid front and single solid rear wheels provide smooth, quiet operation
  • Adjustable Operator Handle – Handle easily adjusts to multiple heights
  • Adjustable Front Pointer – Easily adjusts for all size dies for following all marks and creating straight lines
  • Bead Dispenser – up to 12.5-in /30 cm dispenser, and 1-inch /2.5 cm increments allow you to “dial-in” the bead drop rate

Complete systems include:

  • (1) ThermoLazer 200TC
  • (1) FlexDie

SPECIFICATIONS:

Weight (unit only): 260 lb
Material capacity: 200 lb
Bead hopper capacity: 40 lb
Standard bead Dispensing width: 12.5 in (Optional 8.5 in)
Temperature : Up to 450 Deg. F.
Main burner BTUs: 30,000
Propane tank size: 20 lb (LP Tank NOT included)
Internal Mixing Paddles: Vertical
Hopper Lid System: Flat, Dual Lid
Die Heat System: Bi-Flame
Fuel Source: LP Gas (LP Tank NOT included)
Melt Time for 300 lb Thermoplastic: Up to 4.5 hours without PreMelt System

Available FlexDie Sizes:

16Y661 – 2 in (5 cm)
16Y662 – 3 in (8 cm)
16Y320 – 4 in (10 cm)
16Y663 – 5 in (12 cm)
16Y190 – 6 in (15 cm)
16Y664 – 7 in (18 cm)
16Y326 – 8 in (20 cm)
16Y665 – 9 in (22.5 cm)
16Y332 – 10 in (25 cm)
16Y207 – 12 in (30 cm)
16Y338 – 3 in × 3 in × 3 in (8 cm × 8 cm × 8 cm)
16Y352 – 4 in × 3 in × 4 in (10 cm × 8 cm × 10 cm)
16Y363 – 4 in × 4 in × 4 in (10 cm × 10 cm × 10 cm)

SKU: 17A341

Additional Information

Manual https://www.linestriperdepot.com/wp-content/uploads/2017/02/TLPM_Manual.pdf
Breakdown https://www.linestriperdepot.com/wp-content/uploads/2017/02/TLPM_Breakdown.pdf
Feature 2 Hopper Size: 200 LB
Brand Graco
Family thermolazer
ThermoLazer Die Size 3-3-3" / 8-8-8cm
ThermoLazer Series 200TC

Reviews

There are no reviews yet.

Be the first to review “17A341 – Graco Thermolazer 200TC Thermoplastic Line Striper System 3-3-3 in. FlexDie”

Your email address will not be published. Required fields are marked *

20 − two =

Product Enquiry