Select Page


TAAC-2001 – Taacorp Can Light Stuffer – Contractor


Available for Purchase!


TAAC-2001 Taacorp Can Light Stuffer

TAAC-2001 Taacorp Can Light Stuffer. Mask recessed can lights faster than ever. This tool will cut labor costs by cutting the time it takes to cover recessed can lights. The user is safer because no ladder or scaffolding is required to reach the opening to be covered, only different lengths of extension poles. The user stays on the ground. The body, discs and tip are made from high impact plastic.


Place both discs on the main body, small disc below the large disc (so you won’t lose it and for more strength). Match the holes, and thread the center pin into the main body. With the center pin facing the user, turn the disc clockwise to tighten and counter clockwise to loosen. You can also hold the center pin and turn the main body to tighten. There is no problem using the large or small disc alone.

The following are the preferred steps:
Thread the main body to the pole or extension pole.
Center a foam plate or bowl upside down on the disc and press down.
Raise pole to recess lighting can opening.
Insert plate or bowl in the can opening and bring pole down slowly.
The plate stays in the opening, protection the opening from spray material.
Repeat for each recessed can opening.

Fluorescent orange for your safety.
Extension pole not included.

TAAC-2001 Taacorp Can Light Stuffer


There are no reviews yet.

Be the first to review “TAAC-2001 – Taacorp Can Light Stuffer – Contractor”

Your email address will not be published. Required fields are marked *

2 × 5 =

Customer Questions & Answers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Prop 65 Warning!

This product can expose you to chemicals which are known to the State of California to cause cancer.